Method Detail

• getSerialNumber

  SerialNumber getSerialNumber()

  Serial Number

  Returns:

  return the USB serial number of this device

• setAnalogOutputVoltage

  void setAnalogOutputVoltage(int port,
                            int voltage)

  Sets the channel output voltage. If mode == 0: takes input from -1023-1023, output in the range -4 to +4 volts. If mode == 1, 2, or 3: takes input from 0-1023, output in the range 0 to 8 volts.

  Parameters:

  port - channel 0 or 1

  voltage - voltage value in the correct range.

• setAnalogOutputFrequency

  void setAnalogOutputFrequency(int port,
                              int freq)

  Sets the channel output frequency in the range 1-5,000 Hz in mode 1, 2 or 3. If mode 0 is selected, this field will be over-written to 0.

  Parameters:

  port - 1 or 0

  freq - output frequency in the range1-5,000Hz

• setAnalogOutputMode

  void setAnalogOutputMode(int port,
                         byte mode)

  Sets the channel operating mode. Mode 0: Voltage output. Range: -4V - 4V Mode 1: Sine wave output. Range: 0 - 8V Mode 2: Square wave output. Range: 0 - 8V Mode 3: Triangle wave output. Range: 0 - 8V

  Parameters:

  port - 0 or 1

  mode - voltage, sine, square, or triangle